Caterpillar 3516B Power Series is a medium to high power diesel generator set that is suitable for mining, quarrying, and construction sites. Its detailed parameters are as follows:

Rated power: 1400 kW~2000 kW 

Number of cylinders: 16 

Displacement: 78.08 L 

Fuel consumption rate: 204 g/kW.h 

Rated voltage of generator: 380V/400V/415V/480V 

Engine water temperature: 95℃ 

Exhaust gas temperature: 530℃ 

When installing this generator set in a mining site, the following requirements need to be met:

The installation ground should be flat and even, without obvious bumps or depressions.

Place the equipment in a suitable location for operation and maintenance. If installed outdoors, a rain shelter should be built to increase the life span of the equipment.

Pay attention to the ventilation and heat dissipation of the equipment, especially during high-load operation.

Necessary adjustments and checks should be made before installation, such as adjusting the engine stability and the electrical parameters of the generator.

Cable and wire layout should be standardized, ensuring good grounding and compliance with international and local electrical safety standards to avoid accidents.

It is recommended to install a dedicated distribution room that fits the generator set, with a complete monitoring system to ensure power supply safety in the mining site.

Reasons for choosing this generator set may include:

High power that can meet the large power demand of mining, quarrying, and construction sites.

High-quality engine and generator that ensure reliable operation of the equipment.

Low fuel consumption rate that can save fuel costs.

Wide adaptability to various occasions.

Easy operation and maintenance, equipped with a complete monitoring system.

High brand recognition, as Caterpillar is an internationally renowned mechanical manufacturing enterprise with high product quality and technology level, which can bring customers a higher sense of trust.

長度，可以考慮將文本轉換為以下格式：

卡特彼勒3516B動力系列是一款中高功率的柴油發電機組，適用于礦場、采石場、建筑工地等場合。

以下是其詳細參數：

額定功率：1400kW~2000kW 

缸數：16 

排量：78.08L 

燃料消耗率：204g/kW.h 

發電機額定電壓：380V/400V/415V/480V 

發動機水溫：95℃ 

排氣溫度：530℃ 

在礦場安裝此發電機組時，需要注意以下要求：

安裝地面應平整、均勻，不得存在明顯的隆起和低洼； 

將設備安裝在適當的位置，以便于操作和維修。若為室外安裝，則需要為設備搭建防雨棚，以增加設備的使用壽命； 

安裝時要注意設備的通風和散熱，特別是在運行高負荷情況下； 

安裝前要進行必要的調整和檢查，如調整發動機穩定性、發電機的電氣參數等； 

電纜和電線布置要規范，保證其良好的接地并符合國際和當地的電氣安全標準，避免事故發生； 

建議安裝正好容納發電機組的專門配電房，并設置完整的監控系統，以保證礦場的供電安全。 

客戶選擇它的理由：

高功率，能夠滿足礦場、采石場、建筑工地等場合的大功率需求； 

高品質的發動機和發電機，確保了設備的可靠運行； 

燃料消耗率低，能夠節省燃料成本； 

廣泛的適應性； 

易于操作和維護，配備了完整的監控系統； 

品牌認可度高。